Ubiquiti UDB-PRO Plug and Play Wireless Device Bridge Pro

5 GHz wireless bridge with PoE output that connects at 5+ km distances or seamlessly uplinks to UniFi WiFi.

Note. Cannot be set up standalone and must be managed by a UniFi Console, Official UniFi Hosting, or a Self-Hosted UniFi Network Server.

PoE adapter included. PoE+ input required for PoE passthrough.

Dimensions

d189.5 x 64.3 mm

(d7.4 x 2.5")

WiFi Standard

WiFi 5

Spatial Streams

2

Coverage Area

5 km (3.1 mi)

Mounting Locations

Wall/Pole

IPX6

Power Method

PoE

PoE+ (Required for PoE output)

MIMO

2 x 2

Max. Data Rate

867 Mbps (BW80)

Antenna Gain

19 dBi

Max. TX Power

25 dBm

Max. Conducted TX Power

25 dBm (Combined)

Supported Data Rates

• 802.11a
• 6, 9, 12, 18, 24, 36, 48, 54 Mbps
• 802.11n
• 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)
• 802.11ac (WiFi 5)
• 6.5 Mbps to 866.7 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80)

Wireless Security

WPA2 AES (Always On)

Max. Power Consumption

9W

Supported Voltage Range

42.5–57V DC

Networking Interface

(2) GbE RJ45 ports

Antennas

Internal

Management

(1) PoE in (PoE output not used)

(1) Passive PoE output

Wind Loading

69 N at 200 km/h (15.5 lbf at 125 mph)

Weight

Device: 431 g (0.95 lb)

With mount: 515 g (1.1 lb)

Mount Material

UV-stabilized polycarbonate, stainless steel

Enclosure Material

UV-resistant polycarbonate

Pole Mount Diameter

0.8–2.1" (20–53.1 mm)

Button

(1) Factory-reset

System LEDs

Power, Ethernet, (4) signal strength

Channel Bandwidth

20/40/80 (MHz)

Certifications

CE, FCC, IC