TP-Link Archer MR600 AC1200 4G LTE Advanced Cat6 Gigabit Router

TP-Link's First 4G+ Router – supports 4G+ Cat6 to boost the data speeds of up to 300 Mbps

Plug a SIM card and play – no configurations needed, compatibility of SIM cards in 100+ countries are assured by years of field tests

MU-MIMO supported – simultaneous data streams increase WiFi throughput and network efficiency.

Supports TP-Link OneMeshTM – co-works with TP-Link OneMesh products to create a flexible and cost-efficient Mesh network

Better Signal for Connections Everywhere – enjoy stable and efficient connections to every device thanks to the two external LTE antennas

Full Gigabit Ports – provides reliable wired connections for bandwidth-intensive devices such as game consoles and STB

Wi-Fi router mode – plug an Ethernet cable into the LAN/WAN port for flexible access if you can't get a 4G connection

Easy setup and management all by Tether app

Fast Wi-Fi Where You Need It

Searching for a stable and flexible network connection? Archer MR600 provides both as a 4G+ LTE WiFi router. Compared with traditional WiFi routers, it integrates 4G+ and WiFi technology, meaning MR600 acts like a phone and needs only a Nano SIM card to get internet access. Experience stable WiFi and share it with your family and friends wherever you are.

Boost Your Broadband Speeds with Stable 4G+ Internet

Whether you’re bingeing HD movies, downloading entire libraries of data, or gaming online, MR600?s boosted 300 Mbps download speeds fulfills your devices? needs. Such fast broadband and reliable internet access is thanks to its 4G+ Carrier Aggregation technology which combines different carrier signals for even faster bandwidth.

Share Powerful Dual Band WiFi with Everyone

MR600 creates a reliable and blazing-fast network powered by 802.11ac Wi-Fi technology. The 2.4 GHz band delivers speeds up to 300 Mbps for everyday tasks like emailing and web browsing, while the 5 GHz band delivers speeds up to 867 Mbps – ideal for HD video streaming and lag-free online gaming.

Vast WiFi Coverage Throughout Your Home

Connect to the internet in every room with an expansive and strong AC1200 dual band WiFi. MR600?s Beamforming concentrates signals towards your connected devices. Its Power Amplifier and Low Noise Amplifier also amplify sending and receiving capabilities, both of which boost your signal coverage.

More Data Streams with MU-MIMO Technology

MU-MIMO technology enables multiple devices to connect to the internet at the same time, reducing wait time, increasing WiFi throughput for every device, and boosting the efficiency of each data stream. With MU-MIMO supported, Archer MR600 provides users a faster network, less interference, and lower latency.

Seamless Roaming with TP-Link OneMesh

Enjoy a stable, whole-home WiFi connection even while you’re moving around your home. MR600 works with TP-Link OneMesh products to create a seamless network under a single Wi-Fi name.

Full Gigabit Ports for Fast Connections

Full Gigabit Ethernet ports provide reliable, warp-speed connections for high-intensive wired devices such as your smart TV, game console, NAS, and more. MR600 also provides a WAN port compatible with cable, fiber, and DSL modems. When it’s set as a wireless router, its 3G/4G connection works as a backup to provide a solid internet connection for you.

Easy Setup and Management

Set up Archer MR600 in minutes thanks to its intuitive web interface and the powerful Tether app. Tether also lets you manage its network settings from any Android or iOS device, including parental controls and access control.

Specification

Interface

• 1 x 10/100/1000 Mbps LAN/WAN Port
• 3 x 10/100/1000 Mbps LAN Ports
• 1 x Nano SIM Card Slot

Button

WPS/Reset Button, WiFi On/Off Button, Power On/Off Button

External Power Supply

Power Adapter: : Input Power 100-240v~50/60 Hz 0.6A

Output parameter 12VDC 1.5A

Dimensions ( W x D x H )

202 x 141 x 33.6 mm (7.95 x 5.55 x 1.32 in)

Antenna

2 x Detachable 4G LTE Antennas

Wireless Standards

IEEE 802.11a/n/ac 5 GHz, IEEE 802.11b/g/n 2.4 GHz

Frequency

2.4 GHz and 5 GHz

Signal Rate

300 Mbps at 2.4 GHz, 867 Mbps at 5 GHz

Reception Sensitivity

• 5 GHz: 11a 54M: -77 dBm
• 11ac HT20: -73 dBm
• 11ac HT40: -68 dBm
• 11ac HT80 : -64 dBm
• 11n HT20: -77 dBm
• 11n HT40: -73 dBm
• 2.4 GHz: 11g 54M: -74 dBm
• 11n HT20: -72 dBm
• 11n HT40: -69 dBm

Wireless Functions

Enable/Disable Wireless Radio, Wireless Schedule, WMM, Wireless Statistics

WAN Failover

Yes

Wireless Security

64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions

Transmission Power

< 20 dBm (2.4 GHz), < 23 dBm (5 GHz)

Network Type

• 4G: FDD-LTE: B1/B3/B5/B7/B8/B20/B28 (2100/1800/850/2600/900/800/700 MHz)
• TDD-LTE: B38/B40/B41 (2600/2300/2500 MHz)
• 3G: DC-HSPA+/HSPA/UMTS: B1/B5/B8 (2100/850/900 MHz)

Carrier Aggregation

B1+B3/B5/B7/B8/B20

B3+B1/B3/B5/B7/B8/B20/B28/B38/B40

B5+B1/B3/B5/B7/B40

B7+B1/B3/B5/B7/B8/B20/B28

B8+B1/B3/B7

B20+B1/B3/B7

B28+B3/B7/B40

B38+B38

B40+B40
B41+B41

Quality of Service

Bandwidth Control

Security

DoS, IPv4 SPI Firewall, IPv6 Firewal, IP and MAC Address Binding, Access Control

WAN Type

Dynamic IP/Static IP/PPPoE/PPTP(Dual Access)/L2TP(Dual Access)

Management Features

TP-Link Cloud, Local Management, Remote Management

DHCP

Server, DHCP Client List, Address Reservation

Port Forwarding

ALG, Virtual Server, Port Triggering, UPnP, DMZ

Dynamic DNS

TP-Link, DynDns, NO-IP

VPN

PPTP VPN, OpenVPN

Access Control

Parental Control, Local Management Control

Protocols

IPv4, IPv6

Guest Network

2.4 GHz Guest Network x 1, 5 GHz Guest Network x 1

Certification

CE, RoHS

Package Content

• 4G+ Cat6 AC1200 Wireless Dual Band Gigabit Router Archer MR600
• Power Adapter

RJ45 Ethernet Cable

Quick Installation Guide