Antec P20C Mid Tower Gaming Case, 1 x USB Type-C / 2 x USB 3.0, Tempered Glass Side Window Panel, Pin-Type Metal Front with Clip-On Dust Filter, 3 x Pre-Installed PWM Fans, E-ATX, ATX, Micro-ATX, ITX Compatible

Antec P20E Gaming Case

Simple Assembly & Superior Cooling

Antec Performance Series P20C White adopts a unique metal design, providing a massive airflow path. With the full-size dust filter, the P20C White can reach the balance between cooling and dust prevention. The pin-type metal front panel is effortlessly removable, and the clip-on dust filter makes cleaning easy. The well-designed styling will give you a remarkable PC showcase.

• Full-Size Clip-On Dust Filter at the Front
• Magnetic Dust Filter at the Top
• Pull-Out Dust Filter at the Bottom

3 x 120mm PWM Fans Included

Pre-installed fans at the front provide massive airflow, and the PWM function can easily reach the balance between cooling and silence.

The included 1 to 4 fan splitter cable makes cable management easy.

Type-C 3.2 Gen 2 Ready

Built-in Type-C 3.2 Gen 2 port provides transfer speeds up to 10 Gbps.

• Power
• Reset

MIC

USB 3.0 *2

Type-C 3.2 Gen 2

High flexibility for Expansion

Features an extensive interior and powerful compatibility. Supports 2 x 360mm radiators at the front and the top simultaneously.

Supports Vertical GPU Installation

Ready to provide users with a more flexible layout through the 7 reusable PCI-E slots for vertical GPU installation.

Dual CPU Motherboard Support

Supports dual CPU motherboards with a width of up to 330mm, reflecting the upgrade and evolution of compatibility.

Building a Clean PC Is Within Easy Reach

Well-designed cable routing makes wiring easy and simple. The cable channels with a cutout on top for stable routing.

9 Fans Simultaneously

3 x 120mm fans and a 360mm radiator can be installed inside the interior at the front. Plus 3 x 120mm fans outside the interior for outstanding cooling. Supports up to 9 x 120mm fans & 360mm radiators at the front and top simultaneously.

Easy Installation

Fits up to 4 drive devices. 2 HDD & SSD compatible hard drive bays; 2 SSD hard drive bays.

• Snap-in 2.5" drive device for easy mounting.
• Removable hard drive cage.
• Tool-free 3.5" drive tray.

Features

• 1. Featuring a large metal perforation design and a full-face dust filter, it maintains a large airflow while effectively preventing dust accumulation
• 2.4mm panoramic side glass panel, capable of displaying components.
• 3. Supports dual-CPU E-ATX (maximum length 330mm) motherboards, increasing the variety of motherboard options.

4. The top and front sections can simultaneously support 360mm water cooling radiators, with a minimum length of 403mm for both.

5.Includes a fan 1 to 4-point cable for easy cable management.

6.The front panel comes standard with three 120mm PWM white-framed, white-blade fans, which effectively regulate CPU temperature and fan speed, and significantly reduce fan noise.

7. The power supply uses a rear-insertion design and comes with two anti-slip pads for easy plugging and unplugging.

8.The power supply compartment features a honeycomb-style vent design, allowing for easy installation of two 120mm fans to accelerate graphics card cooling.

9. The back of the side panel uses lock-on screws, which will remain attached to the side panel even after the screws are loosened, so there's no need to worry about the screws being lost after removal.

10. Seven reusable PCIe brackets, fully compatible with most commercially available vertical adapters.

11. Seven reusable PCIe brackets, fully compatible with most commercially available vertical adapters.

12. Includes 8 white cable guides (tethering rubber rings) + 3 extra cable ties

13.White magnetic dust filter at the top + white plastic snap-on dust filter at the front + white pull-out plastic filter at the bottom

14.Removable 3.5? HDD Holder

15. Includes a white graphics card bracket, which allows for adjustment of the graphics card's support position to prevent deformation and damage caused by the graphics card sagging.

Specifications

Case Specification

• Dimensions 469 x 220 x 490mm (DWH)
• Form Factor Mid Tower
• Materials Steel + Plastic
• Mainboard Support E-ATX, ATX, Micro-ATX, ITX
• Front Access & Controls Power, Reset , USB 3.0 x 2, Type-C 3.2 Gen 2 x 1, MIC x 1, HD-AUDIO x 1
• Side Panel 4 MM Tempered Glass Side Panel

Drive Bays

• Expansion Slots 7
• 3.5" /2.5" 2/2
• 2.5" 2

Fan

• Front 3 x 120mm / 3 x 140mm
• Top 3 x 120mm / 2 x 140mm
• Power Supply Shroud 2 x 120mm
• Rear 1 x 120mm
• Included Fan(s) Pre-installed 3 x 120mm PWM fans in front (P20C White)

Radiator Support

• Front 120 / 140 / 240 / 280 / 360mm
• Top 120 / 140 / 240 / 280 / 360mm
• Rear 120mm

Clearance

• Max GPU Length = 375mm
• Max CPU Cooler Height = 170mm
• Max PSU Length (Include cable) = 205mm(with HDD)
• (Include cable) = 410mm(without HDD)

Miscellaneous

• Dust Filter Front / Top / Bottom
• Net Weight 8.1 Kg(P20C White) / 8.3 Kg(P20C White Elite)
• Gross Weight 9.32 Kg(P20C White) / 9.52 Kg(P20C White Elite)
• Warranty 2 Years